-
Product and Solution
Product and SolutionSingle Point Wall Mounted DetectorRespiration Protection EquipmentSuppressed Air Pump
- Industries
- Service and Support
- FAQ
- Company
The DK series of gas monitoring systems (cabinet type) is an on-line monitoring system for multi-point, multi-gas applications.
This system utilizes the hub method, touch screen control, and a Chinese operation interface.
The system's hub method, touch screen control, Chinese operation interface, and display interface customization through software ensure a user-centric design.
The display interface can also be customized with the software.
| Technical Parameters | |
|---|---|
| Scope of application | Measuring the concentration of various gases, etc. |
| Supported protocols | Modbus RTU, CAN internal protocol |
| Ambient pressure | 86~106kPa |
| Ambient humidity | 0-90% RH |
| Environmental Temperature | -20℃ ~ +50℃ |
| Measurement precision | 0.2%(F.S) |
| Resolution | Intelligent display 1, 0.1 or 0.01 (determined by the range) |
| Display Mode | Liquid crystal display, touch screen size can be selected according to user's choice |
| Communication Signal | 2 RS485 |
| Contact capacity | DC24V/5A (default) or AC220V/5A |
| Total alarm delay time | <2s |
| Device address | 1-256 |
| Baud Rate | 4800-115200 (9600 standard) |
| Alarm Settings | Two levels of alarm, interval alarm (oxygen), and Over-limit alarm (other gases) |
| Working Power | AC (185~255)V,50Hz |
| Alarm Records | Time, channel, concentration, status |
| Host Output Signal | Standard RS485;Switching output Synchronized 4~20mA/per channel |
| Input Signal | Default (4-20)mA (2-wire/3-wire/4-wire gas detector) RS485, CAN-BUS, (0-5V), (0-20)mA,Optional Pre-Shipment |
| Sensor Power | 24VDC 5A |
| Alarm Record | Can store the last 100 records,User can increase the number of records by adding a USB drive |
| Data Memory | The system itself can remember 1 hour 30 minutes,User can increase the USB memory extension time |
| Channel Locking | Lock a Channel |
| Conversion Rate | 25μs |
| System Power | 220VAC 50HZ 500W |
| UPS Power | 2KVA supports system operation for over 2 hours (optional) |
| How it works | Multi-Channel Patrol Inspection |
| Output Power | DC24V 300mA |
| Dimension | L×W×H: 800×600×2100mm (standard), can be customized |
Send You Message Send You Message